LoboSolitario.com

Oh...Man Please wait for a few day(may be tomorow) because this file are so big(200MB) And I will get your new link as soon. What site do you want me to re-upload.

PS.Try again now copy a link and paste to notepad and copy from notepad to IE or firefox address.

no way !!! i tried many times in many ways  but it is like "thepyratebay"  impossible to access it ....   if you can upload the sp4R2 again .....   thanks in advance

good!  thanks a lot  here is 24.49!!!  bye

Dear jatuchai

thanks a lot!!!!  i downloaded and extracted sp4_r2.  No time now to install, i will do next days and let about the installation.

Keep in touch on this forum!

thanks again
cleo

cleodidi you are lucky than me I try anyway to crack this program but still not work. It's only show logo wilcom2006 and shut off a program.

the only tool that has changed is the toro generator. if you have old serial reader or new getid both work the same.
also ther is a file that goes into wilcom res directory
look at instructions carefully.
i have made i work

the NEW one i mean.....

I?m installed always exactly according to instruction Wilcom 2006+SP4 at least 10 times. always on erasure disk . but me it has never malfunction. Only introductory first picture opened. where can be error?

Would have been possibly some video tutorial.

Please give to somebody functional crack for programme Wilcom 2006 SP4. Thank you.

so, guys, hello
i had some free time to investigate too..
what i've got was only the welcome "wilcom" logo for 15 sec, and thats all.
what i noticed:
1. some of you are realy wrong when asking about toro activator (of sp2) and the GET ID.exe (which is missing actualy for the sp4) as they are equivalent.
   I guess most likly the GET ID.exe should be equivalent of the SERIAL READER (which was into the SP2), because that was the process (using Serial Reader)of creating actual ID.ID (or 1.ID)
   So, as the SERIAL READER works only by present of HARDLOCKFILTER.SYS, I think our cracking pack is not full at all. (Still not sure what is missing..)
   Also,into the video you might be able to see, that HARDLOCKFILTER.SYS EXISTS , but thats 352 KB, not 408 KB (as it was in SP2 pack)
2. Other point is the exsisting of SOLUTION.DLL which you can see as a CRYPTO API32 v.5.131.2600.1106.
   THIS IS A RENAMED file and thats exactly the file CRYPT32.dll which all of you have into system32 directory (and thats Windows system file)
3. In the video is not shown creation of the ID file, which let me thinking that the instructuons are kind of true, but not full.
    The GET ID.EXE has the same icon as the TOROActivator (of SP2) but I dont think we must use that GET ID.EXE (if this is some kind of real TOROActivator), because the KEYGEN.EXE is doing that same job here - with inputing ID file, if creates the TOROXXXXX.hasp file
    For me its fake that making ID file and making HASP file could be done by EXE files that have ... equal icons...
4. For my oppinion, what we miss actualy is ONLY HARDLOCKFILTER.SYS (not anymore), and with some little different way, we may use to do that job finaly.
   I guess SERIAL READER (of SP2) can use the actual HARDLOCKFILTER (which must be 352 KB !!!) so be able to create the needed ID file
 
 Hope it might help someone to do some next investigating and let us know about
 
 Thanks
   

Hej Jatuchai, thats good, but still not enough. If u wanna tell the story, just do it.
Something wrong again or just hidden. Do you realy have the way?

Functions to someone that crack from what description? Me no work, is that a always the same result, 15 secund of welcome window. That is all what with will start. Write his experience. Thank all.

@cleodidi
 
can you share your SP4 cr4ck with insructions? I have tried cr4ck from jatuchai many times, unluckily did not work.

Quisiera saber si se puede colocar en Español, ya que el que tengo es SP2 y está en español y no quiero cambiarlo al Inglés aunque sea SP4
Gracias.